Tips On Replacing A Prefab Fireplace

Posted on

Prefabricated fireplaces are a great thing to have in the house but just as with any other appliance, it will eventually need replacing. While it is certainly possible to remove them, they do require a bit more effort just because they are built into the walls of the home and not set out in the open like other appliances are. Here are a few tips on how to perform a prefab fireplace change in Baltimore.

Read also : Benefits of An In-Home Sauna

1. Make sure you know how the fireplace is built into the home.

They are generally attached in one of two ways. Either they are set back into an interior wall, much like a closet is or they are built directly onto the inside of an exterior wall. There is no difference in how the fireplace is removed but you will need to know what is on the other side of the wall before removing the fireplace.

Read also : Why do you need a fire damage restoration company?

2. The fireplace can be removed from either the fron or the back of the wall.

If removing from the back, it will be quite easy and only the drywall will need to be removed. If the fireplace is going to be removed from the front, it will again be easy but the only difference will be the decorative pieces on the top of the fireplace will need to be removed. Depending on what the new fireplace looks like, they may or may not be able to be reused with the new fireplace.

These are both great tips on performing a prefab fireplace change in Baltimore. The change may be because the fireplace has outlived its usefulness or it may be because the homeowner simply wants a change in look for the home. Either way, you will be enjoying a new prefab fireplace in no time at all.

Read also : Tips for Choosing the Right Cabinets